| A/D Conversion: | 24-bit/192kHz, PCM multibit SD |
| Analog Audio Inputs: | One unbalanced eight-channel input array, RCA connectors Four unbalanced stereo pairs, RCA connectors Two balanced stereo pairs, XLR connectors Four microphone inputs, 3.5mm mini plug, accepts either stereo plug (tip/ring/sleeve) or mono plug (tip/sleeve) |
| Analog Audio Outputs: | One unbalanced 7.4-channel array, RCA connectors One balanced 7.4-channel array, XLR connectors Remote Zone One unbalanced stereo pair, RCA connectors |
| Analog Video Inputs: | Four component video - one BNC, three RCA connectors (Y, Pb, Pr) Three S-Video connectors Three composite video, RCA connectors |
| Analog Video Outputs: | One component with three BNC connectors (Y, Pb, Pr) One composite monitor, RCA connector |
| Component A/D Conversion: | 12-bit, 110MHz (4× SD, 2× ED, 1× HD oversampling) |
| Component D/A Conversion: | 14-bit, oversampling to 216MHz |
| Component Input/Output Levels: | Y: 1.0Vp-p with 75ohms load (700mVp-p video) Pb/Pr: ±350mV with 75ohm load (700mVp-p) |
| Component Video Compatibility: | 480/576i, 480/576p, 720p and 1080i |
| Composite Input Level: | 1.0Vp-p with 75ohm load |
| Composite Monitor Output Level: | 1.0Vp-p with 75ohm load |
| Control Inputs and Outputs: | One RS-232 port, RJ-11 connector One Ethernet port, RJ-45 connector One ML Link port, RJ-45 connector Four programmable trigger outputs, 3.5mm mini plug, accepts either stereo plug (tip/ring/sleeve) or mono plug (tip/sleeve) Output Voltage: 12V Output Current: 100mA One IR receiver, on front panel One IR input jack, 3.5mm mini plug, accepts either stereo plug (tip/ring/sleeve) or mono plug (tip/ring), 12V |
| D/A Conversion: | 24-bit/192kHz, PCM multibit SD |
| Digital Audio Inputs: | Six S/P-DIF coaxial (RCA) and three S/P-DIF optical (TOSlink) connectors Coaxial and optical input connectors conform to IEC-958, S/P-DIF standards Two AES/EBU inputs, XLR connectors |
| Digital Audio Samples: | 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz |
| Dimensions: | Height (with feet): 9.46 inches (240.4mm) Height (without feet): 8.7 inches (221.0mm) Width: 17.48 inches (444mm) Depth: 17.4 inches (442.4mm) |
| Dynamic Range: | 94dB (Reference level: 1kHz, 30kHz LPF) |
| HDMI Input Formats: | Video: 480/576i, 480/576p, 720p, 1080i, 1080p Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2, 96, 176.4, 192kHz) |
| HDMI Inputs: | Six HDMI, Type A, Version 1.1, 19-pin connectors |
| HDMI Output Formats: | Video: 480/576i, 480/576p, 720p, 1080i, 1080p Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2, 96, 176.4 and 192kHz) |
| HDMI Outputs: | Two HDMI Type A, Version 1.1, 19-pin connectors |
| Input Impedance: | 100Kohm |
| Maximum Input Level: | 7.5V/15Vrms RCA/XLR |
| Maximum Output Level: | 7.5V/15Vrms RCA/XLR |
| Operating Temperature: | 0° to 35°C (32° to 95°F) |
| Power Consumption: | 175W |
| Power Requirements: | 120V~, 60Hz / 100/220/230V~, 50-60Hz; factory set for destination country |
| Rack Mounting: | Optional rack mount kit is available, refer to chapter 1: "Getting Started" in the owner’s manual for ordering details |
| Reference Input Level: | 2Vrms |
| Reference Output Level: | 1.5V/3Vrms RCA/XLR |
| Relative Humidity: | 95% maximum without condensation |
| Remote Control: | Handheld, back-lit IR operation; requires two AAA batteries (included) |
| S-Video and Composite A/D Conversion: | 12-bit, 110MHz (4× SD, 2× ED, 1× HD oversampling) |
| S-Video and Composite Compatibility: | NTSC/PAL |
| S-Video Input Level: | Y (Luma): 1.0Vp-p with 75ohm load (700mVp-p video) C (Chroma): 300mVp-p with 75ohm load |
| Signal-to-Noise Ratio: | 94dB (Reference level: 1kHz, 30kHz LPF) |
| Storage Temperature: | -30° to 75°C (-22° to 167°F) |
| THD + N: | 94dB (Reference level: 1kHz, 30kHz LPF) |
| Weight: | Net weight: 54.5lbs (24.6kg) Shipping weight: 71lbs (32.5kg) |