|
General |
|
Minimum Phase Distortion. The algorithms used to calculate and correct the room modes are designed to give the best results with the least amount of phase-induced distortion. This is unique to the JBL BassQ processor and is not available from any other product. |
|
Mono or Stereo Inputs. Supporting both LFE and stereo subwoofer inputs allows for a greater range of applications and allows the JBL BassQ unit to be used with a variety of different processors. Although the system has been designed to work with the rest of the Performance Series system, including AV2 and AVA7, the unit can be used in almost any system and can improve the in-room response of almost any installation. |
|
Multiple Subwoofer Outputs. Up to four subwoofers can be optimized. Multiple subs allow better seat-to-seat response and can greatly improve the listening experience over a single subwoofer. The JBL BassQ unit allows optimizing multiple subs to achieve the most accurate in-room response possible. |
|
Multiple Microphone Inputs. Multiple microphones allow for the optimization of multiple seats. This results in a larger listening area that benefits from a more accurate room optimization. |
|
Two Listening Curves. Two different playback curves have been implemented to better match the type of playback material. Cinema mode closely follows the standard for playback curves used in commercial cinemas and scoring stages. Music mode is a gentler playback curve that better mimics the frequency response in most music production studios. |
|
Maximum Input Signal |
2V RMS |
|
Frequency Response (+0.5/-1dB) |
20Hz – 150Hz, +0.5, –0.5dB |
|
THD |
<0.01%, 20Hz – 180Hz |
|
Power Consumption |
15W |
|
Power Supply Input |
100V – 230V ~AC, 50Hz – 60Hz |
|
Signal-to-Noise (dBA) |
112dBA |
|
Dimensions (H x W x D) |
2" x 17-3/8" x 15-1/8" (51mm x 440mm x 384mm) |
|
Weight |
9 Ib (4.1kg) |
|
Shipping Weight (System, Accessories, Packing) |
19.16 Ib (8.7kg) |
