1G HD over IP Transmitter
|
Overview
1G HD over IP Transmitter
The Projector Connector™ HD/IP™ allows you to simultaneously send out an HDMI® 1.3 Signal (up to 1080p) to one or more HDMI™ video projectors or LCD Panels and return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure. Can be used to distribute HD digital content from multiple sources to up to 200 displays on a LAN by cascading Ethernet switches, allowing the farthest display to be located 1,000’s of feet away from the 1080p source device while sustaining excellent picture & sound quality. Each device is installed using 1 piece of UTP or STP cable. AV signals are transmitted digitally over the CAT5/6/7 cable without any signal loss. The integrated Scaler function allows different input and output resolutions up to 2048x2048 (different output displays can be at different resolutions). The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.NOTE: Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support 1 transmitter.Any HDMI source can simultaneously be diplayed on any number of display devices (if multiple displays are permitted by the HDMI source) using VLAN isolation on a Managed Ethernet switch. Using the HTTP GUI a PC (wired or wireless) can control what signal is being watched at each location. Sophisticated Home Theater installations can use a programmable console to control the system using RS232 commands. The Managed switch must support IGMP and permit duplicate IP addresses across the VLAN domains. You must use a third party home automation solution to provide distributed remote control functionality.eCommerce CMS by
